15
2. Initial Scanner Setup
To use the scanner as a network scanner, you must make basic network environ-
ment settings in addition to the scanner settings .
To make the basic settings such as timer setup and network environment set-
tings, see the Network Quick Installation Guide. Then proceed to the detailed
network delivery scanner settings.
Use as a Network Delivery Scanner
This section explains how to make the
minimum necessary initial settings to
use this scanner as a network delivery
scanner. First, you need to set the "De-
livery options" in the Scanner set-
tings, then set the delivery server
address.
Important
❒
These settings should only be
made by the network administra-
tor, or under supervision of per-
sonnel charged with network
management.
A
Press the
{{{{
UserTools
}}}}
key.
The Scanner Features screen ap-
pears.
B
Press
[
Config.
]
.
C
Press
[
↓↓↓↓
Next
]
until
[
7. Delivery op-
tion
]
appears, and then press
[
OK
]
.
D
Press
[
↓↓↓↓
]
and select “Installed”.
An "*" appears with the current
setting.
E
Press
[
OK
]
.
Note
❒
When you set the delivery op-
tion to "Installed", you can make
the initial settings for the net-
work delivery scanner func-
tions. However, the condition
(enabled or disabled) of the net-
work delivery scanner function
does not change until you have
restarted the scanner.
ZDLH470
Summary of Contents for 400672
