Ricoh 400672, Operating Instructions Manual

Page: 15 / 60

5
1. Before Use
Preparation
Before using this scanner as a network delivery scanner, the following prepara-
tions are required.
❖ ❖ ❖ ❖
Setting the scanner to be used as a network delivery scanner
To use this scanner in a network environment with a delivery server, the fol-
lowing settings are required.
⇒
P.15 “Use as a Network Delivery Scanner”
• "Network settings" in Initial setup
Make sure that the appropriate basic settings were made, such as the IP ad-
dress, to allow the scanner to be used as a network scanner.
Reference
For information about how to make basic settings to allow the scanner
to be used as a network scanner, see the Network Quick Installation
Guide.
• "Delivery options" in Scanner settings
Select delivery options and make the necessary settings to use the scanner
as a network delivery scanner.
• "Delivery server IP address" in Network settings
Specify the delivery server IP address.
Note
❒
Specifying the IP address is only possible when "Delivery options" in
the Scanner settings is selected.
❖
❖ ❖
❖
Setting the scanner to scan documents as a network delivery scanner
To scan documents using the scanner or a network delivery scanner, the fol-
lowing settings are required.
• Scan setup
Make the necessary settings for scanning documents, such as density, res-
olution and scan size. By specifying settings under user names beforehand,
you can easily change them for each document.
• Scanner Configuration
Make the settings for scanner operation such as the maximum data size
that can be sent to the delivery server.
Reference
For more information, see " P.15 “Initial Scanner Setup” ".