Richiger EA 910, Operator'S Manual

Page: 32 / 76

Grease zerks (qty) Lubricant Interval in hours
1 PTO shaft U-joints 2 Grease 8
2 Sliding shafts Apply w/brush Grease 16
3 Plastic shields 2 Grease 16
4 Discharge tube Sliding bearing housing 1 Grease 50
5 Hinge assy. 4 Grease 50
6 Cylinder bushing 1 Grease 50
7 Compression springs Apply w/brush Grease 50
8 Drive shaft Plastic bearing caps 2 Grease 50
9 Shaft bearing 2 Grease 50
10 Pivoting beam Pivot bushing 2 Grease 50
11 Cross auger drive Chain tensioner 2 Grease 50
12 Auger drive chain Apply w/brush Grease 50
13 Roller drive Chain tensioner 1 Grease 50
14 Roller drive chain Apply w/brush Grease 50
15 Tri-lobed plates 2 Grease 50
16 Front drive Front drive chain Apply w/brush Grease 50
17 Rear drive Rear drive chain Apply w/brush Grease 50
18 Wheel spindles Bearing caps 3 Grease 50
19 Roller Roller bearings 2 Grease 50
20 Jack stand 1 Grease 50
21 Wheels Hubs 2 Grease 100
22 Lower drive Chain drive casing - Oil (3 liters) 100
(1)
23 Intermediate drive Gearbox - Oil (5 liters) 100
(1)
925
15
Lubrication schedule
Ref (1): SAE 140 oil level should be checked every 100 hours.