Richiger EA 910, Operator'S Manual, Page: 18 / 76

5) Lift the bottom half of the bag bringing it up to
the roller. Notice that the bottom half is one
continuous section of plastic that runs the entire
length of the roller and that it is the black inner layer
of plastic that is visible.
Punch the plastic sheet through each holding stud
(Fig. 17) leaving a remainder of 10 or 20 inches to the
edge.
Do not worry if the plastic is not perfectly distributed
along the length of the roller or if folds and creases
remain after attachment
(Fig. 18)
.
Fig.17
Fig.18
911