Richiger EA 910, Operator'S Manual, Page: 24 / 76

Once all grain possible has been picked up in this way the tractor
engine is stopped. For reason of operator safety, it is now
necessary to disconnect the sweep augers from the main
transmission while still allowing the discharge auger to turn and
unload grain. Remove the lock pin from the sweep auger gear
case and pull out the coupling gears' handle (Fig. 28), which will
disconnect the auger drive. With sweep augers disconnected, the
auxiliary hopper is attached to the slot located at the base of the
discharge auger.
At this stage the sliding panel or divider that separates the sweep
augers from the discharge auger is introduced in corresponding
space between auger flightings (Fig. 29). Then provided crescent
shaped covers are attached to the ends of the divider, thus
effectively covering and sealing both openings of the cylinder
shaped grain reception chamber (Fig. 30). In this way the totality
of grain introduced in the auxiliary hopper will be captured by the
discharge auger, valuable loading time gained as no grain is
tossed out of the chamber by the whipping and churning action of
the auger.
Fig.28
Fig.29
Fig.27 Fig.26
917