IMPORTANT
The operator should become familiarized with machine controls before attempting actual operation. Keep unit in
good working condition. Any modification could cause malfunctioning, potentially dangerous situations, or reduced
machine durability.
03
In order to obtain maximum performance from your grain bag unloader, we recommend you keep
the owner's manual in a handy place for quick consultation. Read the manual carefully before
attempting to unload grain from bags and pay special attention to operating and maintenance
instructions.
Safety precautions
For the operator
Before transporting the grain unloader, verify that:
a)
The tow bar pin is properly secured
b)
Check tire pressure
c)
Check that wheel bolts are properly tightened
d)
Attach safety chains between machine's tow bar and
tractor drawbar for added security on the road
Most accidents are caused by human error. Follow all safety procedures.
Make sure all people are safely positioned before starting tractor's engine and engaging
the PTO.
Keep unloader clean and sheltered when not in use. This diminishes risk of deterioration
and eventual failure.
Keep a fire extinguisher handy.
Decals with safety indications and warnings should be strictly heeded, kept in good
condition and replaced if necessary.
When towing the machine, drive with the utmost caution on public roads.
Keep hands, feet and clothing well away from moving parts.
Stop the tractor's engine before attempting a hands-on task on the unloader.
04
Summary of Contents for EA 910
