Richard Paul Russell SpaceLogger.S10, User Manual

Page: 8 / 34

SpaceLogger
®
.S10
User Manual
©2012-13 Richard Paul Russell Limited, New Harbour Building, Bath Road, Lymington SO41 3SE United Kingdom
Tel +44 (0) 1590 679755 Fax +44 (0) 1590 688577 e-mail sales@r-p-r.co.uk web www.r-p-r.co.uk
- 7 -
017SL167/3 04/09/13
5 SETUP FEATURES
The SpaceLogger.S10 settings are customisable using a configuration file named SETUP.TXT
written to the SD card.
The following parameters may be modified using defined commands:

Setting the time & date
See section 5.1

Start and end character strings to define each data sample
See section 5.2

Logging of a second data sample
See section 5.3

Selective logging of the sample start and end identifiers
See section 5.4

Addition of separator between first & second data samples
See section 5.5

Line breaks after data samples
See section 5.6

Timeout when waiting for second data sample
See section 5.7

Logging of data from second RS232 input
See section 5.8

Baud rate of RS232 input/output
See section 5.9

Logging interval/sample rate
See section 5.10

Recording to single log file
See section 5.11

File name format for the recorded data
See section 5.12

Time-stamping
See section 5.13

Data sampling
See section 5.14

RS232 data output
See section 5.15

Handshake & response between devices
See section 5.16

Handling of unprintable characters
See section 5.17

Logging of switch status on Digital I/O channels
See section 5.18

Output of a file’s content on start-up
See section 5.19

Logic inversion of the input signal
See section 5.20

Resetting SpaceLogger to defaults
See section 5.21
Refer to the sections below for command details and section 5.22 for how to create the
SETUP.TXT file.
Please refer to Appendix A1 for full list of commands and the valid inputs for their values and the
default settings.