SpaceLogger
®
.S10
User Manual
©2012-13 Richard Paul Russell Limited, New Harbour Building, Bath Road, Lymington SO41 3SE United Kingdom
Tel +44 (0) 1590 679755 Fax +44 (0) 1590 688577 e-mail [email protected] web www.r-p-r.co.uk
- 24 -
017SL167/3 04/09/13
6
LOGGING
Figure 5
6.1
SD Card
Once the time and date have been set on the SpaceLogger; when the SD card is next inserted
correctly into the SpaceLogger (with power supplied), the unit should ‘Beep’ once and the red
LED blink as the card initialises. At this stage, the SpaceLogger’s internal buffer is cleared and is
ready to start receiving new data from the connected equipment.
The length of time the memory card takes to initialise will depend on the formatting of the card
and the amount of data already stored on it.
The green LED will then switch on indicating that the unit is ‘Ready to Record Data’. The green
LED will remain on while the unit is in this state.
The SD card is designed to fit easily into the card slot one way only. Do not bend the card or force
it into the slot.
SpaceLogger is compatible with SD cards up to 2GB capacity but not SDHC cards. MMC and
MMC mobile cards up to 2GB capacity are also compatible.
Clock
synchronisation,
Stop Recording
& Buffer Purge
Button
Card Slot for
SD card
insertion
Green LED:
ON: Ready to
Record Data
Red LED:
FLASH: Power
on and
Writing data to
card
