1. Precautions on the Use
•
This Section "Precautions Relating to Use" sets forth precautionary notes that the user should
observe in order to prevent physical injury to the user and/or damage to property.
•
The nature of problems that may result in the event of improper operation, and consequential effects
on the quality and performance of the balance, are indicated under the two categories of "Caution"
and "Recommended," and explained using symbols.
This symbol indicates a risk of injury or property damage if the
balance is used improperly. Be sure to observe these notes to
ensure safe use o–f the balance as the improper use may cause
serious results.
RECOMMENDED
This term indicates steps that the user should take to ensure the
quality and reliability of the balance.
Meanings of Symbols
Each symbol is accompanied by an instruction.
強 制 記 号
Mandatory
Symbol:
Indicates a “mandatory” action that should be executed
without fail.
水 平 確 認
Check Level
禁 止 記 号
Prohibitive
Symbol:
Indicates a "prohibited" action that must not be executed.
使 用 禁 止
Do not Use
注 意
！
CAUTION
分 解 禁 止
Do Not
Disassemble
Do not disassemble or modify the unit.
•
Could cause malfunction or heat generation
•
Contact our Marketing Division or Technical
Service Division.
定 格 外 禁 止
Do Not
Deviate from
Ratings
Only AC power (rated value) should be used.
Only use the dedicated AC adapter.
•
Use of other types of power or adapters may
result in heat generation or malfunction of the
balance.
移 動 禁 止
Do Not Move
Do not move the balance when a sample is
loaded.
•
The loaded sample may fall off the
measurement pan and cause an injury.
2
Summary of Contents for TC-1200
Page 2: ......
Page 25: ...Key Points of the Procedure 22...
