5. Switching Function for Units of Measurement
Pressing the Function key allows the user to switch the unit of measurement to [
g
], [ct], [%], and so on.
During setup, a maximum of five different units can be registered for use in function setup mode.
5.1 Switching Units of Measurement
Switching the units of measurement to be displayed
Function
Zero/Tare
Memory
On/Off
Target
g
Press the Function key.
Each press advances through the units
of measurement to be displayed.
※
The balance is shipped from the
factory with the following default setup:
[
g
]
→
[ct]
→
[Pcs]
→
[%]
→
[
g
]
→
· · ·
5.2 Setup of Units of Measurement
When values [
81
.
5
.
u
.] to [
85
.
5
.
u
.] are entered prior to use, the desired unit of measurement to be
displayed can be chosen simply by pressing the Function key. For more information on the units of
measurement that can be set here, please refer to “4.2 Description of Functions” on page 13.
Example: To change the default factory settings to pound units, use [
82
.
5
.
u
.
] in the factory
settings.
1 Display the function item [
82
.
5
.
u
.
14
]
Function
Zero/Tare
Memory
On/Off
Target
g
Press and hold down the Function key.
Release the key as [
Func
] appears on
the display. The function setup mode is
now activated and the first item is
displayed. Press the Function key
several more times until [
82.s.u.14
]
appears.]
2 Setting the unit to a pound
82.5.u. 16
82.5.u. 14
Function
Zero/Tare
Memory
On/Off
Target
Press the Zero/Tare key several times
to specify [
82. S.u. 16
].
3 Pressing the [Target] key to restore measurement mode.
0.00
g
82.5.u. 16
Function
Zero/Tare
Memory
On/Off
Target
Pressing the the Target key will reset
the measurement mode.
15
Summary of Contents for TC-1200
Page 2: ......
Page 25: ...Key Points of the Procedure 22...
