27
8.3 Setting up Limit Values by Inputting Values (cont.)
8 Opening the value input screen
◄
000.00
Function
Zero/Tare
Memory
On/Off
Target
Press the Zero/Tare key.
Follow the same procedure as in “Step
2.”
9 Setting the upper-limit value
◄
023.45
◄
033.45
Function
Zero/Tare
Memory
On/Off
Target
Function
Zero/Tare
Memory
On/Off
Target
Follow the same procedure as described
for the lower-limit value and enter the
upper-limit value.
10 Saving the upper-limit value
◄
233.45
Function
Zero/Tare
Memory
On/Off
Target
Press the Memory key.
After saving the upper-limit value, the
balance displays it briefly and terminates
setup.
Key Points of the Procedure
1.
The limit values you have set can be checked each time you press the Set key.
The balance displays the lower-limit value after showing [
L. SET
], and the upper-limit value
after showing [
H. SET
].
Upper-limit value
displayed
Lower-limit value
displayed
Measurement mode
restored
Conti
sing
0.00
◄
77.38
233.45
2.
If you make a mistake, press the Function key during the setup of actual quantities or the
Set key during the setup of values.
3.
If you press the Memory key while a value is flashing, an actual quantity will be set based on the
weight currently loaded on the balance. Pressing the Zero/Tare key at this time displays the
value input screen.
4.
If the [
◄
] mark lights up for all three judgement indicators, HI, OK, and LO, the lower-limit value set
exceeds the upper-limit value. Check the values, since mistakes can occur with entries, as in
cases when the upper-limit value is specified with a negative sign.
5.
When the [M] mark is flashing on the value input screen, the sign on the left end can be changed.
Press the Zero/Tare key to switch between the positive and negative signs.
Function
Zero/Tare
Memory
On/Off
Target
nuous pres
Function
Zero/Tare
Memory
On/Off
Target
Function
Zero/Tare
Memory
On/Off
Target
◄
Summary of Contents for TC-1200
Page 2: ......
Page 25: ...Key Points of the Procedure 22...
