3.2 Operation
Check
1 Turning on the power
When the balance has the AC
adapter connected, it displays [
＊
].
Pressing the On/Off key
The display section lights up, and the
balance is ready for operation.
2 Checking the display
Check to see if the display has any
missing indications or unlit parts.
A few seconds after startup, the
indication is reset to zero.
3 Switching
the
measurement
mode
0.00
0.00
0.00
0
Function
Zero/Tare
Memory
On/Off
Target
Function
Zero/Tare
Memory
On/Off
Target
Function
Zero/Tare
Memory
On/Off
Target
Function
Zero/Tare
Memory
On/Off
Target
Press the Function key.
Each time the key is pressed, the unit
of measurement changes, as
indicated.
※
The balance is shipped from the
factory with the following switching
sequence: [
g
]
→
[ct]
→
[Pcs]
→
[%]
→
[
g
]
→
· · ·
4 Verifying changes in the read-out indicator
Press the measurement pan lightly
and make sure that the read-out
indicator changes.
Also, ensure that the read-out
indicator is reset to zero when you
release your hand.
0
0
F
Pcs
#
g
％
ＨＩ
ＯＫ
ＬＯ
9
Summary of Contents for TC-1200
Page 2: ......
Page 25: ...Key Points of the Procedure 22...
