Configuration
© Rice Lake Weighing Systems
●
All Rights Reserved
13
4.3 Configuration Mode
Use the following steps to enter into
Configuration
mode.
1. Ensure the scale is turned off.
2. Turn the scale on by simultaneously pressing
and
. Continue to hold both keys until
Id
appears.
The unit cycles through its startup function and continues to display the software version.
3. Access the setup switch located in the back of the scale to enter the setup parameters for the scale. Use a small paper
clip, small screwdriver or other similar object to press the setup switch.
4. Once the setup switch is pressed,
PROG
displays.
5. Scale can be configured using a series of menus accessed through the front panel when the scale is in
Setup
mode.
Figure 4-2. Top Level Menu
6. Press
to advance to the desired menu.
7. Press
and advance in the manual to the related menu selection for further instructions.
ENTER
DEF
CALIB
PROG
DONE
TEST
Available only when
accessing test menu
See
BMI
ENTER
