RL-350 Series Wheelchair Scales
4
Visit our website
4. Stand the scale on its side so that the plastic packaging material can be removed.
Figure 2-2. Remove Plastic Wrapping off of Scale
2.2.1 Scale Feet Adjustment
The scale feet are shipped attached to the scale. Adjustments need to be made in order for the scale to sit properly on the floor.
1. There must be adequate clearance between the scale base and the floor, so screw each foot out counter clockwise,
two full turns. This will ensure that there is enough clearance between the scale base and the floor.
Figure 2-3. Backing out the Scale Feet
2. Carefully unwrap the load cell cable located on the underside of the scale. It will run out the underside of the scale.
Figure 2-4. Unwrap the Cable from the Underside of the Scale
