Rice Lake RL-350-5, Technical Manual

Page: 18 / 32

RL-350 Series Wheelchair Scales
14 Visit our website www.RiceLake.com
4.4 Programming Mode Menu
Various parameters can be set while in Programming mode.
Figure 4-3. Programming Mode Menu Structure
The following table lists the various display messages and sequence when setting up the scale.
Parameter Description Choices Steps
FULL Full capacity of the scale Value ( capacity of
scale )
The display toggles between a numeric value and FULL ;
If you do not want to change the value, press the BMI key to move to the
next setting; Example: from FULL to LOAD. If you want to change the
value, use the following steps;
1.Press ENTER key to change value starting with the right most digit.
2.Use the Up/Down arrow keys to increment/decrement numbers.
3.Press BMI key to move to the left.
4.Use the Up/Down arrow keys to increment/decrement numbers.
5.Press BMI key again to move to the left
6.Use the Up/Down arrow keys to increment/decrement numbers.
7.When done press ENTER key to move to the next parameter (LOAD).
LOAD This is the amount of weight applied during
calibration; Can also be changed in the
calibration menu
Value (200 lb) The display toggles between a numeric value and LOAD ;
If you do not want to change this value, press the BMI key to move to the
next setting; Example: from LOAD to ASTART; If you want to change the
value, use the following steps;
1.Press ENTER key to change value starting with the right most digit.
2.Use the Up/Down arrow keys to increment/decrement numbers.
3.Press BMI key to move to the left.
4.Use the Up/Down arrow keys to increment/decrement numbers.
5.When done, press ENTER key to move to next parameter (ASTART).
Table 4-1. Configuration Mode Menu
PROG
FULL LOAD G-CAL G-LOC ASTRT ARW SAL ROUND DISP
value value value value value value value
20.0
5.0
10.0
2.0
0.5
1.0
0.2 0.0
0.0000
00000
0.000
0.00
5
7
6
8
9
0
2
1
4
3
96
192
144
288
384
576
48
1152
BAUD ATOL ALEN ATOUT TOFF SPACE UNITS OP SAVE
value value value value
PXX-X
LB/KG
LB
KG