background image

Page 13 / 14 

 

19. Warning 
The use of any accessory or attachment, other than those recommended in this instruction manual, may present 
a risk of injury to persons or animals and may cause damages. 
The user and/or operator are responsible for any damages or injury caused to properties and/or persons. 
20. Have your product repaired by a qualified person 
Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged part in an 
authorized service centre is recommended. 
This electric product is in accordance with the relevant safety requirements. Repairs should only be carried out 
by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. 
21. Remarks: 
The safety precautions and instructions given in this manual are unable to cover in detail all the conditions and 
situations that may arise.  
The operator and/or user must use common sense and caution when operating the product especially for any 
matters that are not referred in the above 
 

3.2- Special warnings when using the pump 

1. Become familiar with the controls and the proper use of the product. 
2. The use of this product by children, without adult supervision, is forbidden. 
3. Only well-instructed adults should operate the product.  
This appliance can be used by children aged from 8 years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe way and understand the hazards involved. 
- children shall not play with the appliance. 
- cleaning and user maintenance shall not be made by children without supervision from an adult. 
4. If the power cable is damaged, it must be replaced by the manufacturer, its after sales service or a person 
with similar qualification in order to avoid any danger. 
If the power cable or extension cord is damaged or cut during operation, immediately disconnect plug from its 
main power source. Do not touch the cable or extension cord before unplugging from main power. 
5. Take care that electrical connection is made within dry area and protected from flooding. 
6. Before connection, check that your power source voltage matches the data indicted on the product (see 
characteristics).  
7. Do not subject the device to rain. Do not use the device in wet surroundings. 
8. Do not aim the water jet directly toward the product or other electrical components!  
Warning: electric shock hazard! Risk of death. 
9. Lay the extension cord in such a way that it cannot get into contact with the liquid being conveyed. 
10. Do not install or tum on the product if there are persons or animals in the conveying medium. (e. g. basin) 
or contacting the conveying medium. 
11. Do not leave the device unsupervised. Unplug the mains plug during periods of extended absence. 
12. As a rule, repairs are only to be carried out by an electrician. If repairs are performed improperly, there is 
danger of liquid getting into the electronic components of the device. 
13. Symbols affixed to the tool may not be removed or covered. Information on the product that is no longer 
legible must be replaced immediately. Contact your dealer to get new labels. 
 

3.3- Safety prescriptions 

1. The supply voltage should correspond to that given on the description label (230V 

 50Hz).  Do not use any 

other type of power supply. 
2. The pump should be supplied by a circuit containing a residual current circuit breaker (RCCD) with a 
sensitivity not exceeding 30 mA.  
Consult a qualified electrician. 
3. The supply cable should be checked periodically and before each use to see if there are any signs of ageing 
or damage.  
If the pump is not in good condition, do not use it. Have it repaired by an authorized centre. 
4. If an extension is used, ensure that it is officially approved. Keep it well away from sharp edges, heat 
sources and combustibles. 

Summary of Contents for Ribiland 516231

























Reviews: