Stop the motor and get in safety conditions
The display must not show any indications
The display shows the first entry available
Select an entry of the menu (see following table); shortly press
P3 to scroll down to the following index
, or
P1 to go back to the
previous menu
The display shows the entry selected.
Confirm
the entry selected by
pressing P2
The first line
of the display shows
the present setting
for the feature selected.
The second line
of the display shows the
possible modification settings
according to the
parameter selected (see specific paragraphs)
Modify the status of the parameter
by following the indications
written in the second line of the display
by using P1 e P3.
The first line
of the display shows
the present setting
for the feature selected.
The second line
of the display shows the
possible modification settings
according to the
parameter selected (see specific paragraphs)
Confirm
the setting selected by
pressing P2
The display indicates the correct storage of data and then shows the entry selected
It is possible to
modify other parameters
(go back to point 3)
or to
exit the programming
menu b
y selecting the option
EXIT
(confirm by pressing P2)
Exit from menu is confirmed by the absence of indications on the display
Press and keep pressed
P1 for 2 s
to activate
MENU A
Press and keep pressed
P2 for 2 s
to activate
MENU B
Press and keep pressed
P3 for 2 s
to activate
MENU C
Press P3 for 2 s. Confirm pressing P2.
Select the language by pressing either P1 or P3. Confirm pressing P2
3. LANGUAGE SETTING
⚠
It is suggested to select the language before any other operations
4. PROGRAMMING MENU
This procedure must be carried out ONLY by the installer and ONLY during the installation of the system.
WARNING: the motor must be still, preferably in closed position, in order to access the programming menu!
4.1 Activation and selection of the programming menus
The control board J-INV 3P is equipped with
THREE
user menus (
MENU A
,
MENU B
,
MENU C
), by which it is possible to regulate, program and modify all featureal parameters. Follow the
indications on the display during the programming phases.
MENU A
- allows to activate the
optional feature
and to select the
intervention modalities of the security systems
.
MENU B
- it is dedicated
to the learning of the runs
, to the operations related to the
manual movement
and to the regulation of the
control parameters of the motor
MENU C
- menu for
auxiliary configurations
for user’s
⚠
Some parts of the control board are subject to dangerous voltages!
Pay attention during the phase of manual accessing to the control board
8888888888888888
8888888888888888
8888888888888888
8888888888888888
8888888888888888
8888888888888888
AUTOMATIC EXIT FROM THE MENU: the menu exits automatically in case of long inactivity (longer than 15 s)
G
B
1⃣
2⃣
3⃣
4⃣
5⃣
6⃣
7⃣
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
39
