20
20
G
B
20
20
OPTIONALS
-
For the connections and the technical data of the fixtures follow the relevant handbooks.
S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency of
the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7059
LATERAL SUPPORT
code ACG7042
SPARK ANTENNA 433
code ACG5452
K
EY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/
Close) and one switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED WITHOUT STOP dim.: 100x100x109
code ACG1010
- TO WALL WITHOUT STOP dim.: 100x100x42
code ACG1030
F
IT SLIM
PHOTOCELLS
for the wall-installation
code ACG8032
PAIR OF COLUMNS FOR FIT SLIM
code ACG8065
FIT SLIM photocells have synchronism function in AC current and
ranges of 20 m.
You can fit many photocell couples close together thanks to the optional
synchronizing circuit
SYNCRO TRANSMITTER TX SLIM SYNCRO
code ACG8029 for more than 2 photocells couples (up to 4).
B
LOCK
KEY SELECTOR FOR WALL-INSTALLATION
code ACG1053
KEY SELECTOR TO BUILD-IN
code ACG1048
F
LAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
To command directly the motor, it is equipped with two microswitches
with contacts 15A 250V.
code ACG2012
To command the motor through a control board. Complete of a led to
segnalize the shutter is open.
code ACG2013
Dim.: 59,5x82,5x29
R
ADIO TRANSMITTER SUN
SUN 2CH
cod. ACG6052
SUN 4CH
cod. ACG6054
SUN CLONE 2CH cod. ACG6056
SUN CLONE 4CH cod. ACG6058
