Pag. 20 di 28
PLATE TO BE CEMENTED
code: ACG8107
NYLON RACK MODULE 4
, with zinc plated angle Iron, In 1mt. bars.
Ideal for gates up to 1,000Kg / 2,200lbs weight
code: ACS9000 1mt / 3,28”
code: ACS9001 10mt / 32,8” (1mt/3,28” x 10)
NYLON OLIVE
code.:ACG4010
E
N
G
L
I
S
H
INSTALLATION KIT
for gates weighting up to a 600Kg / 1300lbs - code: ACG4655
FITSYNCRO PHOTOCELLS
for the wall-installation - code:ACG8026
The range you can set is 15÷30mt - 49÷100”
You can fit many couples close together thanks to the synchronising circuit.
Add the
SYNCRO TRANSMITTER
, code: ACG8028, for more than 2 photocells couples (up
to 4).
COUPLE OF BUILT-IN BOXEX FOR THE FITSYNCRO
code: ACG8051
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
code.:ACG1053
BLOCK KEY SELECTOR TO BUILD-IN
code.:ACG1048
SPARK ANTENNA
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention not to let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91
code. ACG5454
SPARK ANTENNA 433
code. ACG5252.
7 - OFINAL OPERATION
Tha gasket shall be fitted only at the end of the installation, before you mount
the case.
Fit the gasket
The gasket is fitted
Motorr ready
Close the case
SPARK BLINKER 12V WITH IN-BUILT INTERMITTENT CARD
code.:ACG7057
MECHANICAL STRIP L=2MT - 6,56 FEET
code: ACG3010
With double-safety contact, you can cut the length you need.
