Rheavendors Group XX OC Installation And Maintenance Manual Download Page 6

MAN1910117 V.7 – 15/11/2012 

3.3 

Obtainable Drinks 

The machine can distribute drinks coming from instant ingredients by the programming functions present inside the 
machine. It is possible to program the machine by the 

Rheaction software

 

      

 

using the 

Rhea black flash card 

or connecting it to a table top PC by an RS232-FLASH. For further information 

contact Rheavendors Services S.p.A. - Customer Service. 

 

Advice for the installer 

Installation and maintenance operations described in text with normal background (white) must be carried 
out only by qualified technical personnel. 

WARNING: For a correct operation, the machine must be installed indoors with operating temperature 
higher than 5° C in normal conditions of use. 

WARNING:  Forestall the machine and the ingredients freezing. 

WARNING: Given the sensitivity of some ingredients used in the machine to excessive temperature and 
humidity, some malfunctions may occur if the machine is operated at temperature higher than 30° C or with 
relative humidity exceeding 80%. Under these conditions the components in contact with the powdered 
ingredients must be cleaned at least once a day. 

WARNING: The maximum operation temperature is 95° C. 

WARNING:  The operations described in Text with normal background must be developed by qualified 
technical personnel only. 

WARNING: Installation in premises where water jets are used (e.g. large kitchens) is to be avoided. 

WARNING: Under no circumstance may the vending machine be used by children or by  people with poorer 
physical, sensorial or mental capacities or who have not been properly informed on correct use; children 
shall be supervised to prevent them from playing with the vending machine.                                                                             

The XX OC vending machine, that you have bought, has been manufactured according to the norms and 
regulations related to the non-toxicity of those parts coming in contact with foodstuffs and electric 
insulation. The machine is mounted inside of an industrial cleaned ambient. The person entrusted with the 
mounting and the test operations is subjected to frequent sanitary examinations to confirm his attitude. 
However, freight conditions, period of stay in the warehouse and possible handling due to the installation 
of the vending machines do not allow using it immediately. 

The machines, before their use, must be subjected to a cycle of sanitary tests as per the instructions 
shown in paragraph “Cleaning and disinfecting of those parts coming in contact with foodstuffs”. 

WARNING: Do not clean the machine with water jets. 

WARNING: Respect the NATIONAL RULES for machines directly connected to the main water supply. 

WARNING: The use of the safety key can make in movements internal parts of the machine. 

WARNING: Install the machine placing the electrical plug easy accessible. 

WARNING: The machine must be installed following the NATIONAL NORMS and only in good airy places.  

WARNING: Use only ingredients specific for semi-automatic vending machines. 

WARNING: The personnel in charge of the loading of the ingredients must own a valid certificate of good 
health following local and NATIONAL NORMS and be equipped with specific protections. Furthermore, 
compliance with any other domestic or local regulations must be checked.  

WARNING: Under no circumstance may the vending machine be used by children or by people with poorer 
physical, sensorial or mental capacities or who have not been properly informed on correct use; children 
shall be supervised to prevent them from playing with the vending machine. 

 

Summary of Contents for XX OC









































Reviews: