MAN1910117 V.7 – 15/11/2012
16
Programming
EAROM data
Programming
OK
•
Switch off the machine.
•
Extract the flash card.
12.3 How to enter and exit from the programming mode
To modify the operation parameters of the machine it is necessary to enter in the programming mode. To enter
press the internal
key P
on the display board inside the machine. The display shows.
1=PROG
3=FREE
2=DATA 4= CLEAN
5=MAINT.
Enter
1
on the keyboard. The display shows:
PROGRAMMING
BUTTON 1 - - - - - - - -
Once the parameters have been modified, enter the
key P
on the keyboard and the machine will exit from the
programming. The display shows:
END PROGRAMMING
- - - - - - - - - - - - - - - - -
12.4 Keys used in the programming mode
Programming is carried out by pressing the buttons on the selection keypad.
Notably:
•
with
1
the sequence of programming sub-menus is visualised;
•
with
6
the sequence of programming sub-menus is visualised in the reverse direction;
•
with
2
the sequence of specific programming functions for the chosen sub-menu is visualised;
•
with
3
the sequence of specific programming functions for the chosen sub-menu is visualised in the reverse
direction;
•
with
4
the value of the visualised function is increased or selected;
•
with
5
the value of the visualised function is decreased or selected.
12.5 Programming sub-menus
Access to the programming sub-menus is possible at any time, after entering the programming mode and entering
1
on the keyboard. These sub-menus are repeated cyclically after the last one has been displayed. The sub-menus
and their video order are as follows:
PROGRAMMING- - - - -
- BUTTON 1 - - - - - - -
FREE
