Commissioning
GARD 8000 Distance Relay
RFL Electronics Inc.
12.10
LED LOGIC ASSIGNMENTS VERIFICATION
1.
Before proceeding with the functional testing, verify the LED Logic Assignments in order to
determine which LED’s located on the Display/TPS module are associated with the Distance
Relay functions.
2.
At the “Home” web page click on “Settings,” from the drop-down menu select “System Labels
and Triggers” and then select “LED Logic Assignments”
3.
Confirm correct LED assignments.
Note:
Not all
labels are
shown
12.11
SYSTEM CONFIGURATION VERIFICATION
1.
From the “Home” web page click on the “Controller” module.
2.
Verify “System Labels,” Active Power Supply or Supplies Voltages, Rear Port IP Address,
Network Mask, and System Time and Date (the IRIG-B if connected will overwrite the System
Time and Date settings).
3.
Modify the programmable settings, if needed.
March 1, 2009
12-9
973.334.3100