Commissioning
GARD 8000 Distance Relay
RFL Electronics Inc.
12.8
NOMINAL VOLTAGE AND CURRENT VERIFICATION
•
If the wiring from the Current Transformer and Potential Transformer was already completed,
please follow the instructions below to verify the Voltage and Current values.
1.
Click on the “Home” page in order to display the “Chassis Configuration Status” web page.
2.
At the “Chassis Configuration Status” web page click on the “Distance Relay” module.
3.
At the “Distance Protection” web page click on “Distance Measured Values” see the following
page.
4.
Verify the Distance Measured Values.
5.
After verifying the “Distance Measured Values” click on “Metering Values” to obtain the
Nominal Voltage and Current measured values of the external equipment.
March 1, 2009
12-6
973.334.3100
