manualshive.com logo in svg

REXROTH efc series, Instruction Manual

Share
Download
REXROTH efc series Instruction Manual Download Page 22

5.2  System Configuration

5.2.1  GSD file

A GSD file which contains the setup information of IO device communication is

required when configuring the PROFINET IO controller.
Users can download the GSD file through the following steps:

1. Click on 

http://www.boschrexroth.com/dcc

.

2. Choose “Frequency converter -> EFC 3610 (or EFC 5610)” from the naviga-

tion bar on left-hand side of the operation interface.

3. Choose “Download area” tab from right-hand side of the interface.
4. Click  on  “DEVICE_DESCRIPTIONS_MULTI-ETHERNET_EFCX610_xxxx-xx-

xx.ZIP” to download the ZIP file.

5. Extract the ZIP file and get the GSD file.

"xxxx-xx-xx" indicates the date.

The following is the instruction of installing the GSD file on the Simatic Manager

software tool. It can be found in the hardware catalog.

Fig.  5-1:   Hardware catalog

Bosch Rexroth AG
PROFINET IO

 Multi-Ethernet Card

16/61

DOK-RCON0*-XFCX610*MUL-IT02-EN-P

Summary of Contents for efc series





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands