REXROTH DIAX04, Troubleshooting Manual

Page: 71 / 114

DIAX04 ELS-06VRS Description of diagnostic letters F... and E...
5-3
DOK-DIAX04-ELS-06VRS**-WA01-EN-P
C100 Communication phase 3 transition check
The command S-0-0127, C1 Communication phase 3 transition check
has been activated.
See also the functional description: "S-0-0127, C100 Communication
Phase 3 Transition Check"
C101 Invalid communication parameter (S-0-0021)
Cause:
Communications parameters which are needed to operate the drive in
communication phase 3 are invalid.
Remedy:
A list of the invalid parameters can be seen in parameter S-0-0021, List
of invalid op. data for comm. ph. 2 . The invalid parameters must be
rewritten so they are correct.
See also the functional description: "S-0-0127, C100 Communication
Phase 3 Transition Check".
C104 Config. IDN for MDT not configurable
Cause:
Telegram type 7 was set in parameter S-0-0015, Telegram type
parameter .
Parameters which are missing in S-0-0188, List of configurable data in
MDT are kept in
S-0-0024 , Configuration list for the master data telegram .
Remedy:
•
set preferred telegram (telegram type = 0..6)
•
You must either set a priority telegram (Telegram type = 0..6) or
provide S-0-0024, Config. list of master data telegram with
parameters. These parameters are also contained in S-0-0188, List of
configurable data in the MDT .
Note: List parameters only allowed in multiplex channel.
See also the function description: "Configuration of telegram contents"
C105 Configurated length > max. length for MDT
Cause:
Telegram type 7 was set in parameter S-0-0015, Telegram type
parameter .
The length of the configured data in MDT, which is determined by
S-0-0024, Configurations list of the master data telegram ,
exceeds the maximum permissible length S-0-0186, Length of the
configurable data record in the MDT.