Rexroth Indramat Mannesmann DKC21.3, Application

Page: 15 / 38

Application Standard Roll Feed
2-9
DOK-SUPPL*-BTV04*ELW**-AW01-EN-P
Markers 33 to 64
The following is visible in this menu:
Marker 33-64
000111 110110 1101 33-48
000111 110110 1101 49-64
F1= Marker 33-64
Fig. 2-11: Marker 33-64
The switched on markers are displayed with „1“ and those off with „0“.
Further markers can be displayed by actuating the F1 key.
Markers 65 to 99
The following appears in this menu:
Marker 65-99
000111 110110 1101 65-80
000111 110110 1101 81-96
010 97-99
Fig. 2-12: Marker 65-99
The switched on markers appear with a „1“, and those off with „0“. The
“ESC” key brings the user back to the previous menu.
Stroke Count/Load (only for FLP Firmware)
If the F5 key is pressed while using the FLP firmware, information about
the press stroke count and the required feed time as a percentage of the
feed distance is displayed. Activating the parameter for Feed Monitoring
(A116) is required for this to function.
Stroke Count
XXXX Strokes/min
Load
XX in %
Fig. 2-13: Stroke Count/Load