Revere 45-CC2V, Service Manual

Page: 126 / 226

1.4 Inflation Valve Reassembly
Prepare the Inflation Valve for rebuilding. Items List:
•
Rebuild Kit (Part No. 95-41120-101)
• DC-111 O-Ring Lubricant
• DC-55 O-Ring
• Wrenches and Sockets
• Torque Wrench
• Loctite
1.4.1
Only organizations that are equipped with the latest technical data, tools and fixtures
are permitted to perform inflation valve rebuilding activities.
1.4.2
Steps 1-10 show a pictorial representation of the Inflation Valve
Reassembly Process.
1.4.3 All O-rings, Safety Rupture Disk, Piston, and Spring are replaced every six years.
(Scheduled during the cylinder valve inflation test and cylinder hydrostatic test)
1.4.4
Lubricate all O-rings (except O-ring -210, IPL Fig. 4, Item 20) with a cold temperature
silicone based lubricant such as DC-55. Apply a thin film of DC-111 lubricant to O-ring -
210.
1.4.5
Clean and dry piston before assembly. Coat piston bore of the Body Assembly (IPL Fig.
4, Item 10), Piston (IPL Fig. 4, Item 130), Piston Spring (IPL Fig. 4, Item 120), and
Piston Housing (IPL Fig. 4, Item 140) with DC-55.
May 29/13
8 - 14
9102