Retsch MM 500 Vario, Manual

Page: 62 / 87

Device control
62
7.10 Cycle mode
Press the button in the main menu to switch to cycle mode. The display switches to the
current cycle.
Cycles can be selected, edited, saved, deleted and started in cycle mode.
If sample materials are frequently ground with the same parameters, these parameters can be
saved in cycle presets and selected when needed as standard operating procedures (SOP).
Up to four cycle presets are available.
The following parameters can be saved in the individual cycles:
•
Vibration frequency
•
Grinding time
•
Cycles (repeats of the grinding time and vibration frequency)
A cycle consists of two parameter sets (A and B). The vibration frequency and the grinding time
can be freely selected for each parameter set. The complete cycle consists of the two parameter
sets (A and B) and the set repeats.

When starting grinding using a cycle, the grinding parameters cannot be changed during
the grinding process.
Fig. 34: Cycle mode
NB1
BL
GS4
GS1
ZN
PE
PS
DZ
ZW