Retsch MM 500 Vario, Manual

Page: 48 / 87

Operating the Device
48

Press on the touchscreen (T) to start the grinding process.

The grinding process can only be started by pressing if this symbol is displayed on the
touchscreen.
If is not displayed on the touchscreen, the parameters for grinding have possibly not
been completely configured or the device hood has not been closed properly.

Wait for the end of the grinding process before finally removing the sample material.
6.8 Removing the sample material
CAUTION
C13.0024
Risks of burns and scalding
Hot grinding jar and/or sample material
−
The sample material and grinding jar can get very hot during the grinding
process.
•
After grinding, always wear protective gloves when handling the
grinding jar.
•
Never open hot grinding jars!
•
Allow grinding jars to cool down to room temperature before
opening them.
NOTICE
N20.0007
Handling foodstuffs, pharmaceuticals and cosmetic products
Products processed
−
Foodstuffs, pharmaceuticals and cosmetic products that have been
processed on the device may no longer be eaten, used or put into
circulation,.
•
Dispose of these substances according to applicable directives.
Fig. 24: Removing the grinding jar Fehler! Textmarke nicht definiert.
H
MH
FR