Retsch MM 500 Vario, Manual

Page: 60 / 87

Device control
60

Swipe the display to switch between the program group 1 to 4, 5 to 8 and 9 to 12.

Press the upper third of the desired program section to activate a program.

Press to start the selected program and the grinding process.

Press to exit program mode and return to the main menu .
7.9.2 Edit a Program
Programs can be created, saved and deleted in the program editor (GS4).
Fig. 33: Program editor
Element Function
NB1 Main menu To return to the main menu.
NB6 Cancel Cancels editing of the program.
PE Parameter settings Shows the parameters configured for the current program.
GS5 Delete Deletes the parameters for the program.
GS6 Save Saves the program.

Press in program mode to select the program editor.

Parameters can only be changed in program mode if editing has been activated using the
button.

The process can be cancelled by pressing the button.
All settings made will then be discarded.
NB1
NB6
PE
GS6
GS5