Retsch MM 500 Vario, Manual

Page: 56 / 87

Device control
56
Element Function
NB2 System settings To select system settings.
NB3 Program mode For access to program mode
NB4 Cycle mode For access to cycle mode
P1 Vibration frequency Following selection on the touchscreen, the vibration
frequency can be set to between 3 and 35 Hz using the
dial.
P2 Grinding time Following selection on the touchscreen, the grinding time
can be set to between 10 seconds and 8 hours using the
dial.
BL Scroll bar Indicates the position of the menu.
GS1 Start grinding process Starts the grinding process after configuration of the
parameters.
P1M Vibration frequency of the
grinding process
Displays the configured vibration frequency of the current
grinding process.
P2M Grinding time of the
grinding process
Displays the configured grinding time of the current grinding
process.
P3M Remaining grinding time Displays the remaining grinding time of the grinding
process.
GS2 Pause grinding process Pauses the grinding process (only after the start of the
grinding process).
GS3 Stop grinding process Stops the grinding process (only after the start of the
grinding process).
7.5 Controlling the grinding process
The grinding process can be controlled from the main menu, from the program and the cycle
mode using the function elements.
Start grinding process
Pause grinding process
Continue grinding process after a pause
Stop grinding process
7.6 Starting the grinding process

Press to start the grinding.

After starting, the start sign changes to the stop sign .