Retsch MM 500 Vario, Manual

Page: 57 / 87

Device control
57
7.7 Pausing the grinding process

Press to pause the grinding.

After pausing, the pause sign changes to the continue sign .

Press to continue the grinding process after a pause.
7.8 Stopping the grinding process
The grinding process is stopped automatically once a defined grinding time has expired.
Grinding can also be actively stopped by pressing the stop button.

Press to stop the grinding.
7.9 Program mode
Press the button in the main menu to switch to the program mode. The display switches to
the current program.
Programs can be selected, edited, saved, deleted and started in the program mode.
If sample materials are frequently ground with the same parameters, these parameters can be
saved in program presets and selected when needed as standard operating procedures (SOP).
Up to twelve program presets are available.
The following parameters can be saved in the individual programs:
•
Vibration frequency
•
Grinding time

When starting grinding using a program, the grinding parameters cannot be changed
during the grinding process.