iBreeze CPAP Clinical Guide
23
10 Cleaning and Maintaining
To avoid prolonged exposure to dusty and humid environment, resulting in impaired performance
and reliability, the user must clean the device regularly. The clean interval of the device and
accessories, please refer the below table:
Interval
Action
Weekly
Clean the device.
Clean the tube.
Clean the water tank.
Monthly
Clean the air filter.
Every 6 months
Replace the air filter.
Annually
Replace the tube.
As necessary
Descale the water tank.
In clinical areas: Disinfect the tube.
For reasons of hygiene: Replace the water tank if it is in poor condition
(e.g., if cracks appear).
When changing
patients
If the device has been used without a bacteria filter: Have professional
hygienic preparation performed before using the device again.
Send the device to the authorized dealer.
10.1 Cleaning the Device
WARNING:
To avoid electrical shock, always unplug the power cord from the wall outlet before
cleaning the device. Do not immerse the device in any fluids.
1. Unplug the device, Wipe the outside of the device using a cloth slightly dampened with water
and a mild detergent. Let the device dry completely before plugging in the power cord.
2. Inspect the device and all circuit parts for damage after cleaning. Replace any damaged parts.
10.2 Cleaning the Tube/Water Tank
Clean the flexible tube and water tank before first use. Remove the flexible tube and water tank
from the device. Gently wash the tube and water tank in a solution of warm water and a mild
detergent. Rinse thoroughly
and allow to dry out of direct sunlight or heat.
10.3 Installing/Replacing the Air Filter
The device comes with a reusable air filter, it must be in place at all times when the device is
operating. Please check the air filter every 1-3 months, clean or replace it if there are any holes
or blockages by dirt or dust.
Note: When you receive your device, if the filter cotton is not installed, you must install the filter
cotton before using the device.
To install or replace the air filter, please follow the below steps:
1. Open the air filter cover.
2. Place a filter cotton onto the air filter cover and then close it.
If replacing, remove the old filter cotton and then place a new one.
