RAMP
® System Operation
Operator’s Manual, RAMP
®
Reader
33
If [Enter] is pressed to select a specific memory that has no results stored, the following display is
shown.
The display returns to the SELECT RESULT TYPE Menu.
2.6.9
Set IQC Timer
The Set IQC TIMER option allows the setting of the interval at which the Reader will automatically run
IQC testing. The default setting for the IQC timer is disabled.
NOTE
: The IQC will only run at the RUN/OPTIONS or RUN LQC/EXIT prompt.
From the SYSTEM Menu, press [▲] or [▼] until 8. SET IQC TIMER is displayed. Press [Enter] to
select this option. The following prompt is displayed, which is the system default:
To initiate the IQC TIMER/INTERVAL, press [▲] or [▼] until the desired IQC interval is displayed.
The range of IQC Timer/Interval is 1-24 hours.
Once the IQC interval is selected, press [Enter] to return to the SYSTEM Menu.
NOTE:
If [Options] is pressed instead of [Enter], the changes to the IQC interval will not be
accepted and the screen returns to the SYSTEM Menu.
To turn the IQC Timer off, press [▲] or [▼] until the message IQC TIMER IS OFF is displayed.
If an IQC Interval has been set, the Reader begins a countdown timer. Once the timer reaches zero,
the IQC will run automatically at the next available opportunity. IQC will only run if the Reader is
powered on and at either the RUN/OPTIONS or RUN LQC/EXIT prompt. The Reader will indicate
that IQC is being conducted as described in Section 2.5.3.
2.6.10 Set LQC Timer
The Set LQC TIMER option allows the setting of a timer in the Reader to automatically flag that LQC
testing/inspection is required. The status of the LQC Timer is monitored during the Power-On Self-
Test, IQC and at the RUN TEST/OPTIONS and RUN LQC/EXIT prompts. In order to activate this
option perform the following steps:
SET IQC TIMER
TO XX HOURS
SET IQC TIMER
(IQC TIMER IS OFF)
MEMORY PREVIOUSLY
ERASED. PUSH A KEY.
