Operator’s Manual, RAMP
®
Reader
To load the lot information, hold the Lot Card by the label with the arrow / text facing up, then insert
the Lot Card with the arrow pointing toward the Reader, contact end first
the keypad on the front of the Reader (Figure
CAUTION!
Do not touch the
The Lot Card must be inserted before the accompanying new
not inserted prior to running the first
appropriate Lot Card (Section 4.2
Refer to the following steps for loading Lot Card information
At the RUN/OPTIONS Menu prompt
emitted and the screen displays the following message:
When the Lot Card is accepted, indicating that the Lot information has been successfully uploaded,
the following message is displayed:
After the Lot Card data has been stored in memory, the Reader beeps twice and prompts the
operator with the following instruction:
When the Lot Card is removed, the Reader will beep once.
CAUTION!
The Lot Card should be kept in the anti
and retained for the life of the
NOTE:
Lot Card information will only upload successfully if it is inserted when either the
RUN/OPTIONS or RUN LQC/EXIT Menus are displayed. The Reader will not acknowledge
Lot Card insertion at any other time. It is only necessary to insert the Lot Card once p
lot as the lot information is retained even when the Reader power is switched off. The
Reader can store data for up to 50 separate lot numbers. When the memory is full, the
oldest data is overwritten when a new Lot Card is inserted. If a Lot Card
cannot be read, the following message is displayed:
4.2)
The Reader verifies the expiry (Use
expiry date, the Reader emits an audible alarm and displays the error message:
EXPIRED! (Section 4.2) Data from an expired lot is not copied into the Reader’s memory.
RAMP
® System Operation
Reader
To load the lot information, hold the Lot Card by the label with the arrow / text facing up, then insert
ot Card with the arrow pointing toward the Reader, contact end first, into the slot located under
the keypad on the front of the Reader (Figure 1-1).
Do not touch the gold contact pads on the Lot Card.
be inserted before the accompanying new Kit lot can be used. If the Lot Card is
not inserted prior to running the first Cartridge for a new lot, the operator will be prompted to inser
4.2).
Refer to the following steps for loading Lot Card information.
At the RUN/OPTIONS Menu prompt, insert the Lot Card. After the Lot Card is inserted, a beep is
emitted and the screen displays the following message:
When the Lot Card is accepted, indicating that the Lot information has been successfully uploaded,
the following message is displayed:
After the Lot Card data has been stored in memory, the Reader beeps twice and prompts the
operator with the following instruction:
, the Reader will beep once.
The Lot Card should be kept in the anti-static pouch provided for safe storage
and retained for the life of the Kit.
Lot Card information will only upload successfully if it is inserted when either the
RUN/OPTIONS or RUN LQC/EXIT Menus are displayed. The Reader will not acknowledge
Lot Card insertion at any other time. It is only necessary to insert the Lot Card once p
ot as the lot information is retained even when the Reader power is switched off. The
Reader can store data for up to 50 separate lot numbers. When the memory is full, the
oldest data is overwritten when a new Lot Card is inserted. If a Lot Card
not be read, the following message is displayed: LOT CARD READ-ERROR!
The Reader verifies the expiry (Use-by) date against its internal clock. If the current date exceeds the
expiry date, the Reader emits an audible alarm and displays the error message: LOT CARD
a from an expired lot is not copied into the Reader’s memory.
REMOVE LOT CARD
LOT DATA VERIFIED
SAVING DATA...
READING LOT CARD
PLEASE WAIT...
® System Operation
13
To load the lot information, hold the Lot Card by the label with the arrow / text facing up, then insert
into the slot located under
can be used. If the Lot Card is
for a new lot, the operator will be prompted to insert the
r the Lot Card is inserted, a beep is
When the Lot Card is accepted, indicating that the Lot information has been successfully uploaded,
After the Lot Card data has been stored in memory, the Reader beeps twice and prompts the
static pouch provided for safe storage
Lot Card information will only upload successfully if it is inserted when either the
RUN/OPTIONS or RUN LQC/EXIT Menus are displayed. The Reader will not acknowledge
Lot Card insertion at any other time. It is only necessary to insert the Lot Card once per Kit
ot as the lot information is retained even when the Reader power is switched off. The
Reader can store data for up to 50 separate lot numbers. When the memory is full, the
is defective or
ERROR! (Section
nternal clock. If the current date exceeds the
LOT CARD
a from an expired lot is not copied into the Reader’s memory.
