RAMP
® System Operation
Operator’s Manual, RAMP
®
Reader
32
During transfer, the receiving Reader displays the following screen:
After completion, the following screen is displayed:
Upon completion of download, source Reader returns to TRANSFER USERS option screen.
If the receiving Reader is not properly connected, the source Reader briefly displays an error screen:
The source Reader then returns to the 6. TRANSFER USERS screen.
2.6.8
Erase Memory
Results can be erased from the Reader memory from the Output Results option. This selection
removes all stored results of the selected result type.
From the SYSTEM SETTINGS Menu, press [▲] or [▼] until 7. ERASE MEMORY is displayed.
Press [Enter] and the RESULT TYPE Menu is displayed.
There are 3 available result types:
1. SAMPLE RESULTS 2. LQC RESULTS 3. IQC RESULTS
To remove the results from memory, press [▲] or [▼] until the appropriate result type is displayed.
Press [Enter]. The display shows the following prompt:
To remove these results from the memory, press [Enter] to select YES. The operator is asked to
confirm this request by the following prompt:
Press [Enter] to confirm results deletion. The MEMORY HAS BEEN CLEARED message with the
result type is displayed for 2 seconds, and the screen returns to the SYSTEM SETTINGS Menu.
ARE YOU SURE? > YES
NO
CLEAR MEMORY? > YES
NO
RECEIVING READER IS
NOT RESPONDING!
USER ID + PIN DATA
RECEIVED & STORED
RECEIVING USERS...
