Section 6
Integra 3™ Electronic Control System
29
Research Instruments Ltd
6
Please refer to the User Interface Icons table on the previous page for
images of the icons discussed below. The icons are identifiable in the
following text by their
Bold
typeface.
Stopwatch
The stopwatch can be accessed from the main screen by pressing the
Stopwatch
icon. Once in the stopwatch screen the timer can be started
and stopped by pressing the
Start
and
Stop
icons respectively, and can be
used between 0 and 59 minutes 59 seconds. After this time it continues
timing from 0 seconds. The
Reset
icon can be used to zero the time. Press
the
Back
icon
to return to the main screen.
Counter
The counter can be accessed from the main screen by pressing the
Counter
icon or the +1 button on the left hand side of the Integra 3. The
counter can be used to count incrementally either upwards or downwards
between 0 and 99. To count upwards, press either the +1 button or press
the
Increase
icon on the touch screen. To count downwards, press the
Decrease
icon on the touch screen. To reset the counter, press the
Reset
icon on the touch screen. Press the
Back
icon
to return to the main screen.
Under-stage Lights
In order to improve visibility underneath the Integra 3, the device is fitted
with white LED lights. These are activated by movement beneath the
Integra 3. The length of time the lights remain on after detecting motion
can be adjusted as follows.
Press the
Settings
icon and then the
Under-stage Lights
icon. The time
period can be adjusted between 0 and 9 seconds by pressing the
Increase
and
Decrease
icons before pressing
Save
to exit. When set to 0 seconds
the lights will remain off. Press the
Back
icon
to return to the main screen.
Summary of Contents for INTEGRA 3
Page 76: ......