Renesas RZ/T2M, User Manual

Page: 51 / 87

Renesas Starter Kit+ for RZ/T2M 6. Configuration
R20UT4939EG0100 Rev. 1.00 Page 51 of 87
Apr 20, 2022
6.12 Ethernet Switch Configuration
Table 6-31, Table 6-32, Table 6-33, Table 6-37 below details the function of the option links associated with
Ethernet Switch (ETHSW) Configuration.
Table 6-37: ETHSW Configuration Option Links
Signal name
MPU
MPU Peripheral Selection Destination Selection
Pin
Por
t
Signal Fit DNF
Interface
/Function
Fit DNF
BSC_A24_ETHSW_LPI0 V5 P08_0
BSC_A24
IC12.11
(SW6-1 = ON)
- IC22.B5 - -
ETHSW_LPI0
IC12.12
(SW6-1 = OFF)
- CN2.1 - -
BSC_A19_ADTRG F2 P01_7
BSC_A19
IC12.53
(SW6-1 = ON)
-
IC22.C3 - -
JA3-A.40 - -
ADTRG_ENCIF_RSPC
K (ETHSW_LPI1)
IC12.52
(SW6-1 = OFF) -
CN1.2 - -
JA1-A.8 - -
BSC_A18_ENCIF2 J6 P02_0
BSC_A18
IC12.2
(SW6-1 = ON)
-
IC22.D3 - -
JA3-A.39 - -
ENCIF2
(ETHSW_LPI2)
IC12.3
(SW6-1 = OFF) -
CN1.3 - -
P08_3
(ETHSW_PTPOUT0)
T6 P08_3 P08_3 - -
J26.9 - -
CN2.8 - -
BSC_A17_MDW F1 P02_1
BSC_A17
IC12.56
(SW6-1 = ON)
-
IC22.E8 - -
JA3-A.38 - -
BSC_A17_MDW
(ETHSW_PTPOUT1)
- - SW4.5 IC14.9 -
DIP_SW6_18
(ETHSW_PTPOUT2)
P16 P13_2 DIP_SW6_18 SW3-6 = OFF - SW3.6 - -
ETH_LED5
(ETHSW_PTPOUT3)
A9 P21_0 ETH_LED5 - -
ETH_LED5.A R13 -
CN3.4 - -
BSC_A16_M2_ENCZ J5 P02_2
BSC_A16
IC29.25
(SW6-1 = ON)
-
IC22.B8 - -
JA3-A.37 - -
M2_ENCZ
(ETHSW_TDMAOUT0)
IC29.26
(SW6-1 = OFF) -
CN1.4 - -
JA5-A.9 - -
ETH_LED0_MDV1
(ETHSW_TDMAOUT1)
A10 P20_2 ETH_LED0_MDV1 - - ETH_LED0.A R6 -
ETH_LED1_MDV2
(ETHSW_TDMAOUT2)
C9 P20_3 ETH_LED1_MDV2 - -
ETH_LED1.A R7 -
IC14.7 - -
ETH_LED3_MDV3
(ETHSW_TDMAOUT3)
B10 P20_4 ETH_LED3_MDV3 - - ETH_LED3.A R11 -
ETH0_LINK R11 P10_4 ETH0_LINK IC36.4 - IC35.59 - -
ETH1_LINK R1 P05_5 ETH1_LINK IC32.4 - IC31.59 - -
ETH2_LINK G5 P00_5 ETH2_LINK IC17.4 - IC16.59 - -
Table 6-38 below details the function of the switches associated with the ETHSW.
Table 6-38: ETHSW Configuration Switch Settings
SW6-1 Explanation
ON Enable the external bus signal. *
1
OFF Enables signals other than the external bus. (CAN, Emulator, I
2
C, ETHSW, etc.)
* 1 : BUS (SDRAM) and ETHSW port 2 cannot be used at the same time.