Renesas RZ/T2M, User Manual

Page: 20 / 87

Renesas Starter Kit+ for RZ/T2M 5. User Circuitry
R20UT4939EG0100 Rev. 1.00 Page 20 of 87
Apr 20, 2022
5.6 Pmod™
The RSK+ board is equipped with connectors for Digilent Pmod™ interface. Please connect the Pmod
TM
Peripheral module that is compatible with the PMOD connector.
The Digilent Pmod™ Compatible headers use an SPI interface, an I 2 C interface and a UART interface. Figure
5 - 1 below shows Digilent Pmod™ Compatible Header Pin Numbering. Connection information for the Digilent
Pmod™ Compatible header is provided in
Table 5-5 and Table 5-6
below.
Please note that the connector numbering adheres to the Digilent Pmod™ standard and is different from all
other connectors on the RSK+ designs. Details can be found in the Digilent Pmod™ Interface Specification.
Pin 6
Pin 1
Pin 7
Pin 12
Figure 5 - 1: Digilent Pmod™ Compatible Header Pin Numbering
Table 5-5: Pmod™ Header (J25) Connections
Digilent Pmod™ Compatible Header Connections
Pin Circuit Net Name
MPU
Pin Circuit Net Name
MPU
Port Pin Port Pin
1 CTS3# P17_4 J16 7 IRQ3 P19_2 D19
2 SCI_TXD P18_0 H16 8 P16_7 P16_7 J19
3
SCI_RXD P17_7 G20 9
P17_0_MDD
P17_0 J15
4
SCI_RTS P18_1 G19 10
P17_1
P17_1 J20
5 GROUND - - 11 GROUND - -
6 3.3V - - 12 3.3V - -
Table 5-6: Pmod™ Header (J26) Connections
Digilent Pmod™ Compatible Header Connections
Pin Circuit Net Name
MPU
Pin Circuit Net Name
MPU
Port Pin Port Pin
1 SSL20 P18_7 F18 7 IRQ9 P17_2 H20
2 MOSI2 P18_5 E20 8 P23_6 P23_6 A2
3*
MISO2
I2C_SCL_A
P18_6
P22_6
E19
E7
9 P08_3
P08_3 T6
4* RSPCK2
I2C_SDA_A
P18_4
P22_7
F19
C6
10
P19_1
P19_1 E18
5 GROUND - - 11 GROUND - -
6* 3.3V
5.0V
- - 12 3.3V
5.0V
- -
*: It is necessary to set the solder bridge jumper to change the function. Refer to section 6.2 for the required
modifications.