Renesas Starter Kit+ for RZ/T2M
8. Code Development
R20UT4939EG0100 Rev. 1.00
Page 80 of 87
Apr 20, 2022
8. Code Development
8.1
Overview
There are several ways to debug the code for this device:
Connect CPU Board to PC through SEGGER development tool J-Link
®
OB that is mounted on CPU Board.
Connect CPU Board to PC through each emulator.
Refer to the manufacturer’s website for more details about each emulator.
8.2
Mode Support
The MPU supports various boot modes configured with RSK+ board. Details of the modifications required can
be found in section 6.3. All other MPU operating modes are configured within the MPU’s registers, which are
listed in the RZ/T2M Group User’s Manual: Hardware.
Only ever change the MPU operating mode whilst the RSK+ is turned off; otherwise, the MPU may become damaged
as a result.
8.3
Address Space
For the MPU address space details, refer to the ’Address Space’ section of RZ/T2M Group User’s Manual:
Hardware.
Summary of Contents for RZ/T2M
Page 87: ...R20UT4939EG0100 RZ T2M Group ...
