M34286T2-CPE User’s Manual
3. Usage (How to Use the Emulator Debugger)
R20UT0214EJ0200 Rev.2.00
Page 51 of 70
Sep 16, 2010
3.5 Time Measurement
(1) Setting time measurement points
Menu Menu
item
Function
Debug Measurement Point
Sets up the time measurement points dialog box.
Setting time measurement points
A time measurement range can be specified by
selecting one of the following eight time intervals:
1. From Go to Break
From when the program starts running to when
it stops.
2. From Go to MP End
From when the program starts running to when
the end of measurement point passed.
3. From Go to Trace Event
From when the program starts running to when
a trace event is met.
4. From Trace Event to MP End
From when a trace event is met to when the
measurement end point passed.
5. From Trace Event to Break
From when a trace event is met to when
execution of the program finished.
6. From MP Start to MP End
From when the measurement start point passed
to when the measurement end point passed.
7. From MP Start to Trace Event
From when the measurement start point passed
to when a trace event is met.
8. From MP Start to Break
From when the measurement start point passed
to when execution of the program finished.
Furthermore, one of the following two can be
specified as the count source for the timer.
TIME(100ns): The passage of time is counted
using the emulator’s timer (100 ns
fixed).
CYCLE MCU: The passage of time is counted
using machine cycles.
Display of the time measurement result
The time measurement result is displayed in the
status bar at the bottom of the window.
Time measurement result display are a
