M34286T2-CPE User’s Manual
3. Usage (How to Use the Emulator Debugger)
R20UT0214EJ0200 Rev.2.00
Page 49 of 70
Sep 16, 2010
(2) Trace point setup dialog box
Opening the trace point setup dialog box
Menu Menu
item
Function
Debug Trace Point
Setting the trace point dialog box
1) Setting the trace point dialog box
Trace point setup dialog box
You can use a combination of address event (A1
or A2) and external trigger event T as a trace
event.
Setting an address event
Click A1 or A2 to select the address event you
want to set.
Setting an external trigger event
You can set edges or pass counts of external
trigger event.
High: Positive
edge
Low: Negative
edge
2) Address event setting window in initial state
Setting an address event
Here, you can select one of three conditions:
Point:
At
specified
address
Range In: In specified address range
Range Out: Outside specified address range
You also can set a pass count.
