M34286T2-CPE User’s Manual
3. Usage (How to Use the Emulator Debugger)
R20UT0214EJ0200 Rev.2.00
Page 45 of 70
Sep 16, 2010
3.3 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1) Opening the hardware breakpoint setup dialog box
Hardware Break Point
Clicking this button opens the hardware
breakpoint setup dialog box.
2) Hardware Break Point Setting Window in initial state
Hardware breakpoint setup dialog box
You can use a combination of address event (A1
or A2) and T (external trigger event) as a
hardware break event.
Setting an address event
Click A1 or A2 to select the address event you
want to set.
Setting an external trigger event
You can set edges or pass counts of external
trigger event.
High: Positive edge
Low: Negative edge
3) Address event setting dialog box
Setting an address event
Here, you can select one of three conditions.
Point:
At
specified
address
Range In: In specified address range
Range Out: Outside specified address range
You also can set a pass count.
