M34286T2-CPE User’s Manual
2. Setup
R20UT0214EJ0200 Rev.2.00
Page 30 of 70
Sep 16, 2010
2.6 Connecting the Power Supply for Emulator
Connect the power supply for the emulator to the power connector (J1). The specification of the power supply for the
emulator is listed in Table 2.3.
Figures 2.12 and 2.13 show the specifications of the power connector (J1) and an applicable plug, respectively.
Table 2.3 Specification of power supply of the emulator
Power supply voltage DC 5.0 V±5
％
/2 A
φ
4.75mm
φ
1.7mm(Inside diameter)
Figure 2.12 Specification of the power connector
Figure 2.13 Specification of an applicable plug
CAUTION
Notes on Connecting a Power Supply of the Emulator:
•
The power cable included in this product package is colored red (+) and black (-).
•
Be careful about the polarity of the power supply. Connecting to the wrong electrode could destroy
internal circuits.
•
Do not apply a voltage exceeding the specified voltage of the product (5.0 V ±5%), because it may cause
burn injuries and the failure of internal circuits.
