7.1 RAM Monitor Window
The RAM monitor window is a window in which changes of memory contents are displayed while
running the target program.
The relevant memory contents are displayed in dump form in the RAM monitor area by using the
realtime RAM monitor function. The displayed contents are updated at given intervals (by default,
every 100 ms) while running the target program.
•
This system provides a 1Kbytes of RAM monitor area, which can be placed at any continuous
addresses.
•
The RAM monitor area can be changed to any desired address range.
Refer to "7.1.2 Setting the RAM monitor area" for details on how to change the RAM monitor area.
The default RAM monitor area is mapped into a 1-Kbyte area beginning with the start address of
the internal RAM.
•
The display content updating interval can be set for each window individually.
The actual updating interval at which the display contents are actually updated while running
the target program is shown in the title field of the Address display area.
•
The background colors of the data display and code display areas are predetermined by access
attribute, as shown below.
Access attribute
Background color
Read accessed address
Green
Write accessed address
Red
Non-accessed address
White
The background colors can be changed.
84
Summary of Contents for Emulator Debugger M16C PC4701
