Renesas Emulator Debugger M16C PC4701, User Manual

Page: 47 / 296

5 Setup the Debugger
5. Setup the Debugger
5.1 Init Dialog
The Init dialog box is provided for setting the items that need to be set when the debugger starts up.
The contents set from this dialog box are also effective the next time the debugger starts. The data set
in this dialog remains effective for the next start.
The tabs available on this dialog box vary with each product used. For details, click the desired tab
name shown in the table below.
Product Name Tab Name
The debugger
for M32C The debugger for
M16 /R8C
C
The debugger for 740
MCU Exist exist exist
Debugging Information Ex ist exist exist
F/W and Work Area --- exist ---
Memo ension Mode ry Ext --- exist ---
Clock Exist exist exist
Script Exist exist exist
You can open the Init dialog using either one of the following methods:
• After the debugger gets started, select Menu - [Setup] -> [Emulator] -> [System...].
• Start Debugger while holding down the Ctrl key.
33