Renault GRAND SCENIC Driver'S Handbook Manual Download

Page: 13 / 246

Jaune

Noir

Noir texte

1.7

ENG_UD7409_1

Carte RENAULT en mode mains libres (X95 - J95 - R95 - Renault)

ENG_NU_840-2_JR95_Renault_1

With the engine running

, if after having

opened and closed a door the card is no

longer in the passenger compartment,

the message Keycard not detected (ac-

companied by a beep when the speed

exceeds a certain level) warns you that

the card is no longer in the vehicle. This

prevents you driving away after having

dropped off a passenger who has the

card, for example.
The warning disappears when the card

is detected again.

RENAULT “hANds-fREE” cARd: use

(3/3)

Locking using the RENAULT card

With the doors and luggage compart-

ment closed, press button

: the vehi-

cle will lock.
The hazard warning lights

flash twice

to indicate that the doors have locked.

Note:

the maximum distance at which

the vehicle locks depends on the sur-

roundings.

special features
The vehicle will not lock if:

– a door or the tailgate is open or not

properly closed;

– a card is still in zone

(or in the card

reader) and no other card is in the

external detection zone.

After locking/unlocking the vehicle

or the tailgate only using the but-

tons on the RENAULT card, remote

locking and unlocking in hands-free

mode are deactivated.
To reactivate the hands-free mode:

restart the vehicle.

Summary of Contents for GRAND SCENIC























































































































































































































































Search results

Summary of Contents for GRAND SCENIC

Reviews:

Related manuals for GRAND SCENIC

Brands by name

Popular brands

Renault GRAND SCENIC, Driver'S Handbook Manual

Search results

Summary of Contents for GRAND SCENIC

Reviews:

Related manuals for GRAND SCENIC

Brands by name

Popular brands