5.6
ENG_UD10966_1
Kit de gonflage des pneumatiques (X95 - J95 - R95 - Renault)
ENG_NU_840-2_JR95_Renault_5
Jaune
Noir
Noir texte
tYre PreSSure KIt
(2/3)
– press switch
5
to inflate the tyre to
the recommended pressure (check
the label affixed to the edge of the
driver’s door);
– after a maximum of
7
minutes, stop
inflating and read the pressure (on
the pressure gauge
4
);
note:
while the bottle is emptying
(approximately 30 seconds), pres-
sure gauge
4
will briefly indicate a
pressure of
6
bar, then the pressure
will drop.
– adjust the pressure: to increase
it, continue inflating with the kit, to
reduce it, turn button
7
located on
the inflation adapter.
If the correct pressure cannot be
achieved, repair is impossible. Do
not drive the vehicle. consult an ap-
proved dealer.
Do not pull out the foreign
body causing the puncture
if it is still in the tyre.
Depending on the vehicle, in the event
of a puncture, use the kit located in
storage compartment
C
or underneath
luggage compartment carpet
D
.
1
4
3
5
6
7
8
2
Before using this kit, park
the vehicle at a sufficient
distance from traffic, switch
on the hazard warning
lights, apply the handbrake, ask all
passengers to leave the vehicle and
keep them away from traffic.
Open the kit, remove caps
1
and
3
(it is
essential
not to remove the cap from
the bottle) then screw bottle
2
to its
base
3
.
With the ignition on,
– connect adapter
8
to the accessories
socket on the dashboard of the vehi-
cle;
– unscrew the valve cap on the wheel
concerned and screw inflation
adapter
6
onto the valve;
c
D
