Renault GRAND SCENIC Driver'S Handbook Manual Download

Page: 32 / 246

1.26

ENG_UD7421_1

Dispositifs complémentaires aux ceintures avant (X95 - J95 - R95 - Renault)

ENG_NU_840-2_JR95_Renault_1

Jaune

Noir

Noir texte

mEThOds Of REsTRAINT IN AddITION TO ThE fRONT sEAT BELTs

(3/4)

Operation

This system is only operational when

the ignition is switched on.
In a severe frontal impact, the air bags

inflate rapidly, cushioning the impact

of the driver’s head and chest against

the steering wheel and of the front pas-

senger against the dashboard. The air

bags then deflate immediately so that

the passengers are not in any way hin-

dered from leaving the vehicle.

special feature of the front air

bag

After a violent impact, it has two deploy-

ment volumes and integrates a ventila-

tion system:
– low volume air bag, this is the first

stage of operation;

– large volume air bag, the air bag

seams rip so that a larger volume of

gas is released into the bag (for the

most severe impacts).

Summary of Contents for GRAND SCENIC























































































































































































































































Search results

Summary of Contents for GRAND SCENIC

Reviews:

Related manuals for GRAND SCENIC

Brands by name

Popular brands

Renault GRAND SCENIC, Driver'S Handbook Manual

Search results

Summary of Contents for GRAND SCENIC

Reviews:

Related manuals for GRAND SCENIC

Brands by name

Popular brands