2.32
ENG_UD12913_2
Aide au parking (X95 - J95 - R95 - Renault)
ENG_NU_840-2_JR95_Renault_2
PARkING DISTANCE CONTROL
(3/3)
Deactivating the system
You may permanently activate or deac-
tivate the front or rear parking distance
control separately.
From the vehicle settings customisa-
tion menu (refer to the information on
the “Vehicle settings customisation
menu” in Section 1), select the line
“Front parking sensor” or “Rear parking
sensor” then activate or deactivate the
system:
<
function deactivated;
=
function activated.
Operating faults
When the system detects an operating
fault , a beep sounds for approximately
3 seconds each time reverse gear is se-
lected and is accompanied by the mes-
sage “Check parking sensor” shown on
the instrument panel
A
. Consult an ap-
proved Dealer.
Special features
Ensure that the ultrasonic sensors are
not obscured (by dirt, mud, snow, etc.).
You can also adjust the volume.
From the vehicle settings customisation
menu (refer to the information on the
“Vehicle settings customisation menu”
in Section 1), select the line “Parking
sensor volume ” then decrease or in-
crease it:
Note
: when the volume is set to mini-
mum, guidance is only provided by the
visual on the instrument panel.
When the vehicle is being driven at a speed below approximately 6 mph (10 km/h),
certain noises (motorcycle, lorry, pneumatic drill, etc.) may trigger the beeping
sound.
A
